volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Trailer Connector|Part 1|Page 15184 > < Trailer Connector|Part 1|Page 15182
Page 9
background image

-

Fold back the carpet.

-

Remove the clips on the lower edge of the folding panel (on both the right-hand and left-hand sides) by pressing in the centre of the clip until an
audible snap is heard.

-

Remove the clips.

-

Unscrew the front clips.

-

Turn the knob (1) on the right-hand and left-hand sides 90°.

-

Fold the panels inwards. Lift the panels out.

-

Remove the two covers (2) and the underlying screws (3).

-

First, pull the boot lid sill trim panel (4) forwards until the two clips on the right-hand and left-hand sides release. Pull forcefully but carefully
since the panel is fitted tightly. Pull the panel straight up until the four clips in the lower edge release.

-

Remove the wiring (5) for cargo compartment lighting.

-

Lift out the sill trim panel.

-

Remove the drain hose (1) from the battery.

-

Remove the rubber seal (2). It will not be re-used.

-

Pull off the small, thin rubber strap on the new rubber seal.

-

Insert the old drain hose through the new rubber seal. Make sure the hose is not obstructed and that it is not folded.

Trailer Connector|Part 1|Page 15184 > < Trailer Connector|Part 1|Page 15182