volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Body and Frame > < Trailer Connector|Part 1|Page 15201
Page 15
background image

Reinstall:

-

the left-hand side panel using the screws and cover. Tighten the screws in the load securing eyelets. Tighten to 24 Nm (18 lbf ft).

-

the covers for the load securing eyelets.

-

D-post panel with connector.

-

the connector for the rear roof lighting (if applicable).

-

the rear headlining.

-

C-post panel.

-

protective cover and bracket for the battery.

-

side floor hatch and folding panel.

-

storage compartment and floor hatch.

Applies to connection of the function for automatic rear fog lamp deactivation
Note! The function requires car-specific software. Program the software according to the service information described in VIDA.

Checking the 7-pin connector:

1. Left indicator lamps
2. Rear fog lamp / reversing lamp / charging
3. Ground
4. Right indicator lamps
5. Right parking lamps
6. Brake lamp
7. Left parking lamps

Body and Frame > < Trailer Connector|Part 1|Page 15201