XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
For better accuracy, measure the flush alignment by use of a Depth Micrometer.
Service:
Adjust the height of the striker by moving it up or down. Adjust the flush of the door by moving the striker in or out.
Hint:
Slightly loosen the screws so that you can adjust in small steps by tapping the striker. Use the existing punch marks or use some tape to keep track of
the movements (see picture).
Step 1.2 Check overall door fitting:
Check the 'load' on the door by closing it with the lock mechanism disengaged as described under step 1.1. There should be no resistance felt until the
door is less than approximately 0.30" (8 mm) ajar.
If you do feel resistance, try to locate the source by listening for squeaky noises from squeezing the door seal or the sill seal (see also step 1.3).
