volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Body - Doors are Hard to Close/Fit Poorly|Page 15494 > < Body - Doors are Hard to Close/Fit Poorly|Page 15492
Page 19
background image

Check correct height of the striker by closing the door with the lock mechanism disengaged (pull and hold the door handle). Listen/feel carefully if the
striker is touching the lock entrance. If you can hear/feel the striker touching the latch assembly, the striker is probably out of alignment (too high or too
low). This will significantly slow down a closing door, making it hard to close. If the striker is too high, you might see or feel the door 'bouncing' when
opened (door falling of the striker).

The flush alignment of the doors must be measured to determine if the striker is too far in or out.

Body - Doors are Hard to Close/Fit Poorly|Page 15494 > < Body - Doors are Hard to Close/Fit Poorly|Page 15492