XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
After adjusting both doors, check the fitting of the window frames towards the body sides and between the front and rear door. The front component
must always overlap the rear component (this can also be seen in the picture with the Depth Micrometer under Step 1.1).
Adjust by bending carefully if required (see picture). Avoid applying too much pressure on the door bow mouldings as they are easily dented!
Window frames must be correctly aligned to avoid wind noise. Pay attention for wind noise around the door frames during a test drive.
Finally, apply touch-up paint to the bolts and hinges if required to prevent corrosion.
Step 1.3 Check door seals:
Open the door and carefully check the complete seal around the edge of the door. Check for signs of abnormal squeezing and verify that the seal is in its
normal position.
