volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Body - Doors are Hard to Close/Fit Poorly|Page 15472 > < Body - Doors are Hard to Close/Fit Poorly|Page 15470
Page 6
background image

Bring the door out by releasing the two bolts from the upper hinge and slightly tapping the door. Move the rear door out in small steps until no unusual
resistance is felt during closing.

Hint:

Do not remove any of the shims!

Use the measurement of the flush alignment of the front door as a reference to keep track of the outward adjustment made on the rear door.

Once the rear door has been adjusted, bring out the front door to +0.04" to +0.05" (+1 to +1.3 mm) flush (see step 1.1).

Body - Doors are Hard to Close/Fit Poorly|Page 15472 > < Body - Doors are Hard to Close/Fit Poorly|Page 15470