XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Rear Cross-Member Bushing: Service and Repair
Sub-Frame Rear, Replacing
Sub-frame rear, replacing
Special tools:
951 2923 Hydraulic hole cylinder See: Tools and Equipment/951 2923 Hydraulic Hole Cylinder
998 5434 Separator L 200 mm See: Tools and Equipment/998 5434 Separator L 200 mm
999 5500 Socket Upper Nut Rear Shock Absorber See: Tools and Equipment/999 5500 Socket Upper Nut Rear Shock Absorber
999 5659 Tension caliper See: Tools and Equipment/999 5659 Tension Caliper
999 7031 Locating pin See: Tools and Equipment/999 7031 Locating Pin
999 7030 Mounting bracket bushing replace See: Tools and Equipment/999 7030 Mounting Bracket Bushing Replace
999 7039 Connecting rod M16X360 See: Tools and Equipment/999 7039 Connecting Rod M16X360
999 7074 Adapter plate See: Tools and Equipment/999 7074 Adapter Plate
999 7060 Plug See: Tools and Equipment/999 7060 Plug
Note! Since the illustrations in this service information are used for different model years and/or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Preparatory work
Removing wheels
Raise the vehicle.
Remove the wheels.
Removal
Removing the exhaust system
Start at the front when separating the three-way catalytic converter (TWC).
Hang up the three-way catalytic converter (TWC) on a hook.
Remove:
