XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
CAUTION: The markings on the bushing and sub-frame must be positioned opposite each other.
Marking the left-hand rear bushing
NOTE: The left-hand rear bushing on the subframe is a different version to the other three bushings. The hole in the center of the bushing is oval. The
oval must be positioned lengthways to the car, as illustrated.
CAUTION: The markings on the bushing and sub-frame must be positioned opposite each other.
Pressing in the bushings
Install the hydraulic tool and press sleeve as illustrated.
Press the bushings into the sub-frame, see the following illustration.
NOTE: Use any of tools 999 5575, 999 5576 and 951 2564.
Installing the wiring for the heated oxygen sensor (HO2S)
