XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Lift in the cargo compartment net through the tailgate. Hang it on the backrest disc as illustrated. Check that the net is horizontal
-
Drill out the holes in the backrest disc through the existing holes in the cargo compartment net. Use a 7 mm (9/32") diameter drill bit
-
Remove any swarf.
-
Take the striker plate and insert it from the front in the hole where it was disconnected
-
Insert the locating pins on the striker plate in the newly drilled holes. Take the knob and tighten the striker plate against the backrest disc.