XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Lift in the cargo compartment net through the tailgate. Hang it on the backrest disc as illustrated. Check that the net is horizontal
-
Drill out the holes in the backrest disc through the existing holes in the cargo compartment net. Use a 7 mm (9/32") diameter drill bit
-
Remove any swarf.
-
Take the striker plate and insert it from the front in the hole where it was disconnected
-
Insert the locating pins on the striker plate in the newly drilled holes. Take the knob and tighten the striker plate against the backrest disc.
Cargo Compartment Wall
Cargo compartment wall