XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
the 2 screws.
Pull the panel downwards and backwards.
Remove the bulb.
Installing the cantrail panel
Install the lamp.
Insert the panel and press it into place.
Install:
-
the 2 screws. Tighten
-
the 2 covers.
Panel D-Post, Replacing
Panel D-post, replacing
As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential
information in the illustrations is always correct.
Removing the D-post panel
Remove the cantrail panel. See Panel cantrail, replacing See: Panel Cantrail, Replacing.
Pull off the inner upper edge of the D post panel.
Pull the D post panel inwards into the car.
Remove:
-
the connector (if there is a loudspeaker)
-
the end mounting. See End mounting, replacing See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/End Mounting, Replacing
(applies only to seven seater versions)
-
the seat belt cover (applies only to seven seater versions).
Insert the seat belt through the D post panel (applies only to seven seater versions).
Installing the D-post panel