XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Note! When replacing the upholstery for the backrest cushion, a new groove must be cut for the grab handle.
Feel behind the upholstery and locate the bracket on the inside. Carefully cut through the upholstery as illustrated. Be extra careful at the ends.
Install:
-
the head restraint panel.
-
the panel for the grab handle
-
1 screw. Tighten
-
the grab handle
-
1 screw. Tighten.
Installing the outer seat (second row)
Lift in the seat.
Install:
-
the 4 M10 screws. Tighten
-
the side pieces on the seat.
Upholstery Seat Cushion Center (Second Row), Replacing
Upholstery seat cushion center (second row), replacing
As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential
information in the illustrations is always correct.
Preparations
