XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Carefully remove the cover.
Pull the lumbar support knob straight out.
Remove:
-
the 2 mounting screws on the side of the backrest
-
the 6 hooks on both sides.
Detach the 2 mechanical cables on both sides.
Remove the lumbar support.
Installing the lumbar support in the backrest cushion
Note! For tightening torques, see See: Specifications
Install:
-
the lumbar support
-
the 2 mechanical cables on both sides
-
the 6 hooks on both sides
-
the 2 mounting screws. Tighten
-
the backrest cushion upholstery. See Upholstery back rest, replacing See: Seat Cover/Service and Repair/Front Seat, Driver's Seat, Front
Seat/Upholstery Backrest, Replacing
-
the lumbar support knob
-
the cover.
Tension the lumbar support.
Install:
-
the front seat. See Upholstery back rest, replacing See: Seat Cover/Service and Repair/Front Seat, Driver's Seat, Front Seat/Upholstery Backrest,
Replacing
-
the battery lead. See Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.