volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Checking the Seat Temperature|Page 16957 > < Checking the Seat Temperature|Page 16955
Page 5
background image

-

Ignition off

-

Disconnect connector from the seat heater module.

Check the cable between fuse 11C/8 terminal #2 (25A) and seat heater (9/12) for left seat and (9/13) for right seat connector terminal #1. Check for a
short-circuit to ground.
Remedy as necessary.

Other information:

-

To connect the breakout box, see Connecting the breakout box See: Body Control Systems/Testing and Inspection/Pinout Values and Diagnostic
Parameters/Connecting the Breakout Box/Connecting the Breakout Box, Central Electronic Module (CEM) 

-

For information about signals, see Signal specification See: Body Control Systems/Testing and Inspection/Pinout Values and Diagnostic
Parameters/Signal Specification 

-

Checking wiring and terminals See: Testing and Inspection/Component Tests and General Diagnostics/Checking Wiring and Terminals.

Checking the Seat Temperature|Page 16957 > < Checking the Seat Temperature|Page 16955