XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Seat Heater: Service and Repair
Heater pad backrest and cushion, replacing
Special tools:
115 8962 CRIMP PLIERS See: Tools and Equipment/115 8962 Crimp Pliers
The illustrations in this service information are used for different model years and / or models. Some variation may occur. However, the essential
information in the illustrations is always correct.
Preparations
Remove the seat. See Upholstery back rest, replacing See: Seat Cover/Service and Repair/Front Seat, Driver's Seat, Front Seat/Upholstery Backrest,
Replacing.
Note! The old heating pad must be removed before a new one is installed. A new heater pad must not be bonded over the old pad.
Note! Read through the entire method before beginning work.
The following heater pad versions are available:
-
heater pad and seat belt reminder
-
heater pad only
-
seat belt reminder only.
Removing the heater pad from the backrest and cushion
Removing upholstery
Remove the upholstery. See Upholstery seat cushion, replacing See: Seat Cover/Service and Repair/Front Seat, Driver's Seat, Front Seat/Upholstery Seat
Cushion, Replacing or Upholstery back rest, replacing See: Seat Cover/Service and Repair/Front Seat, Driver's Seat, Front Seat/Upholstery Backrest,
Replacing (2003) or Upholstery seat cushion, replacing See: Seat Cover/Service and Repair/Front Seat, Driver's Seat, Front Seat/Upholstery Seat
Cushion, Replacing (2004-).
Note! Cut off the half moon clips and remove any remaining parts of the clips.