volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Checking the Seat Temperature|Page 16970 > < Checking the Seat Temperature|Page 16968
Page 7
background image

heater pads that have positional straps.

Note! The positional straps must not be cut before bonding is complete.

Installing upholstery

Before securing the upholstery, check the following:

-

that any remnants of the half moon clips have been removed

-

that the rods (steel or plastic wire in the pockets inside the upholstery) are in position and not protruding outside the pleats

-

that the rods or the rod pleats are not bent or in contact with the heater pad. Adjust if necessary

-

that the seam and the rods and pleats are positioned in the channel so that they are not in contact with the heater pad

-

that the plastic wires are the correct length and cannot affect the function of the heater pad.

Install the upholstery. See Upholstery seat cushion, replacing See: Seat Cover/Service and Repair/Front Seat, Driver's Seat, Front Seat/Upholstery Seat
Cushion, Replacing or Upholstery back rest, replacing See: Seat Cover/Service and Repair/Front Seat, Driver's Seat, Front Seat/Upholstery Backrest,
Replacing (2003) or Upholstery seat cushion, replacing See: Seat Cover/Service and Repair/Front Seat, Driver's Seat, Front Seat/Upholstery Seat
Cushion, Replacing (2004-).

Checking the Seat Temperature|Page 16970 > < Checking the Seat Temperature|Page 16968