XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Press one slide rail forward/rearward based on the result of step 1. While doing so, tighten the front bolt. Then tighten the rear bolt of the same rail.
Make sure that the slide rail is locked when this is done.
Next, check that both sides can lock at the same time by sitting on the seat and adjusting its longitudinal position. With both slide rail mechanisms
locked, tighten the two remaining loose bolts (front and rear). Check that the longitudinal position and height of the seat can be adjusted.
If the function is still not OK, start adjusting the other rail according the method described above and work in the opposite direction. Finally, tighten all
four bolts to 29.50 Lb ft (40 Nm). Reinstall the cover panels.
Step 4:
Check the longitudinal and height position of the seat. If you can still feel play and hear a clicking sound see Service Bulletin 850036 for reducing the
play/clicking sound at the lower mounting points of the front height adjuster.
Warranty Information
