volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Pulse Wheel Drive Shaft, Replacing|Page 7989 > < Pulse Wheel Drive Shaft, Replacing|Page 7987
Page 6
background image

Finishing

Function testing after replacement

Read off any diagnostic trouble codes (DTCs).
Erase diagnostic trouble codes (DTCs).
Ignition off.
Start the engine. Check that the stop (brake) warning lamp does not light. If the stop (brake) warning lamp lights, the car must not be driven.

Test driving

Test drive the vehicle. See: Test Drive Form (ABS), description See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Test Drive
Form (ABS), Description.

Pulse Wheel Drive Shaft, Replacing|Page 7989 > < Pulse Wheel Drive Shaft, Replacing|Page 7987