XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Clean and check the brake caliper and dust cover.
Clean and check the brake pad mating surfaces in the brake caliper and caliper holder.
Clean the sliding pins using a steel brush.
Check piston dust boot.
Note! If the dust boot is damaged dirt may have penetrated the cylinder. If this is the case the caliper must be replaced.
Checking the brake disc
Check brake disc friction surfaces.
If the brake disc displays signs of out-of-true, check its lateral run out. See Brake disc rear, calibrating See: Brake Rotor/Disc/Testing and
Inspection/Brake Disc Rear, Calibrating.
Replace the brake disc if it displays signs of heavy wear, variable thickness or similar. To replace, see Brake disc rear, replacing See: Brake
Rotor/Disc/Service and Repair/Removal and Replacement/Brake Disc Rear, Replacing.
Note! Minimum disc thickness/replacement limit = 18.0mm. Minimum recommended disc thickness when installing new brake pads = 18.7mm.
Installation
Note! For tightening torques, see Specifications See: Specifications/Tightening Torque.
Lubricating the sliding surfaces
