volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Brake Disc Front, Calibrating|Page 8093 > < Brake Disc Front, Calibrating|Page 8091
Page 5
background image

Rotate the brake disc. Use a socket to help.
Note the test gauge run-out. Brake disc lateral run-out must not exceed 0.040 mm.
If lateral run-out exceeds the value, replace the brake disc.
To replace the brake disc, see Brake disc front, replacing See: Service and Repair/Removal and Replacement/Brake Disc Front, Replacing.

Finishing

Remove the test equipment.
Install the calliper holder and the brake calliper. Use new screws on the calliper holder.
For tightening torques, see Specifications See: Specifications/Tightening Torque.
Install the wheel. See Installing wheels See: Maintenance/Wheels and Tires/Wheels/Service and Repair.

Brake Disc Front, Calibrating|Page 8093 > < Brake Disc Front, Calibrating|Page 8091