XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Install:
-
the brake pipe in the ABS hydraulic modulator. Tighten. See: Tightening torque See: Specifications/Tightening Torque
-
the brake pipe in its clips at the bracket. Adjust the pipe as necessary
-
the clip holder on the brake pipes by the side member
-
the bracket. Tighten. See: Tightening torque See: Specifications/Tightening Torque.
Note! The brake pipes must not be in contact with each other or the car body.
Installing the integrated relay/fusebox
Install the box in its mounting.
Install:
-
the cable harness
-
the connector
-
the 2 x M6 screws in the mounting
-
the 2 x power cables
-
the M8 nut to secure the power cables.
Installing the air cleaner (ACL) housing
Press the air cleaner (ACL) housing into place.
Install the air hoses and the connector.
Finishing
Bleed the brake system. See Brake system, bleeding (using bleeding unit) See: Brake Bleeding/Service and Repair/Brake System, Bleeding (Using
Bleeding Unit).
Connect the battery lead.
Testing the pressure of the brake system
