XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Remove:
-
the connector for the pump motor from the control module
-
the bracket from the ABS hydraulic modulator
-
the control module.
Installing the ABS hydraulic modulator
Warning! The ABS hydraulic modulator must not be opened under any circumstances. Reassembling it requires special equipment and
facilities.
On the control module check:
-
that none of the pins on the connector are damaged
-
that there are no contaminants on the mating surfaces between the control module and the ABS hydraulic modulator.
Install:
-
the control module on the ABS hydraulic modulator
-
the screws. Tighten to 1.8 Nm.
Note! The ABS hydraulic modulator is filled with brake fluid. It is important that the plugs are not removed until the brake pipes are to be
connected.
