volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Parking Brake Cable Front, Replacing|Page 8304 > < Parking Brake Cable Front, Replacing|Page 8302
Page 16
background image

Install:

-

the disengagement cable for the pedal

-

the wiring for the pedal switch

-

the 3 x M8 screws for the parking brake.

Installing the mechanical brake cable in the center console

Install:

-

the outer casing for the cable in the console

-

the power distributor for the front mechanical brake cable in the two rear mechanical brake cables.

Install:

-

the carpet

-

the sill molding

-

the amplifier with the 3 x M6 screws

-

the 4 screws for the seat

-

the plastic guards for the 4 screws.

Installing the soundproofing panel 

Install:

-

the soundproofing panel

-

the 2 screws.

Installing the center console

Install the center console. See: Center console, replacing See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair.

Finishing

Adjust the parking brake. See: Parking brake, adjusting See: Adjustments/Parking Brake, Adjusting.

Note! Activate the parking brake firmly for 10 minutes.

Post-adjust the parking brake

Parking Brake Cable Front, Replacing|Page 8304 > < Parking Brake Cable Front, Replacing|Page 8302