XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Remove:
-
the rear cables from the primary cable yoke
-
the cable from the bracket.
Remove the lower screw for the accelerator pedal
3
(APM) and loosen the two upper screws.
Lift the accelerator pedal (APM).
4
Pull the mechanical cable downwards so that it comes out from the behind the mounting plate for the accelerator pedal (APM). Pull the primary brake
cable backward out through the tunnel (console area).
Operation of the mechanical adjuster.
5
To remove slack from the cable or tighten the parking brake, part A and B will be pulled apart using special tool # 9512947, as A and B are pulled apart
a clicking noise will be heard, after each click the cable will be locked in that position.
In order to release the cable or loosen the parking brake.
A.
Remove clip D
B.
Turn part B as illustrated in the direction of part C, continue turning until Part A is released and can be slid into part B.
