XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
3.
Connect the balancing spring (PN 1212200) between the drilled hole on the cable yoke and the drilled hole on the cable bracket shown.
4.
After the spring is installed it will now be necessary to reset the self-adjuster on the parking brake pedal assembly. Locate the Release spring (see
Illustration No Disassembly Required) and push it forward slightly (approx. 1/4 inch) using a screwdriver hold it forward for approximately 5
seconds. This will allow the balancing spring to pull back on the self-adjuster.
5.
Depress and release the Parking Brake 10 times (this will allow the self-adjuster to reset).
6.
Apply the parking brake and check the adjustment (between 4 - 6 clicks). If ok reassemble console and road test. If pedal adjustment not ok or if
the parking brake will not hold the vehicle fault trace as required.
Warranty Information
