volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Pulse Wheel Drive Shaft, Replacing|Page 8570 > < Pulse Wheel Drive Shaft, Replacing|Page 8568
Page 6
background image

Finishing

Function testing after replacement

Read off any diagnostic trouble codes (DTCs).
Erase diagnostic trouble codes (DTCs).
Ignition off.
Start the engine. Check that the stop (brake) warning lamp does not light. If the stop (brake) warning lamp lights, the car must not be driven.

Test driving

Test drive the vehicle. See: Test Drive Form (ABS), description See: Antilock Brakes / Traction Control Systems/Testing and Inspection/Initial
Inspection and Diagnostic Overview/Test Drive Form (ABS), Description.

Pulse Wheel Drive Shaft, Replacing|Page 8570 > < Pulse Wheel Drive Shaft, Replacing|Page 8568