volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Auxiliary Cabin Heater Overheat Sensor / Switch|Service and Repair|Page 11400 > < Auxiliary Cabin Heater Fuel Pump|Service and Repair|Page 11396
Page 1
background image

Auxiliary Cabin Heater Overheat Sensor / Switch: Service and Repair

Overheat protection thermostat/flame sensor/engine coolant temperature sensor, replacing

As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the essential
information in the illustrations is always correct.

Removing the overheat protection, thermostat flame sensor and coolant temperature sensor

Remove:

-

the bumper cover. See Casing bumper front, replacing See: Body and Frame/Bumper/Front Bumper/Front Bumper Cover / Fascia/Service and
Repair 

-

the heater. See Engine coolant heater, replacing See: Service and Repair/Engine Coolant Heater, Replacing 

-

the nut and the cover.

Remove:

-

the engine coolant temperature sensor (1) by working it loose

-

the overheat protection thermostat (2) by slackening off a nut.

Auxiliary Cabin Heater Overheat Sensor / Switch|Service and Repair|Page 11400 > < Auxiliary Cabin Heater Fuel Pump|Service and Repair|Page 11396