XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Install:
-
the drive plate
-
the screw, 1 pc., using a counterhold: 999 7193 Counterhold See: Tools and Equipment/999 7193 Counterhold and tighten with 13 Nm.
Checking the clearance
Check the clearance between the turning plate and the belt pulley with a feeler gauge.
The clearance should be 0.3-0.5 mm.
0.3 mm clearance all the way round
It must not be possible to insert 0.6 mm at any point.
If clearance is not within given values, replace the shims.
The following dimensions are available:
0.2 mm
0.3 mm
1.0 mm.
Installing the air conditioning (A/C) compressor