volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Climate Control Unit Rear, Replacing|Page 11716 > < Climate Control Unit Rear, Replacing
Page 2
background image

Position the heater.

Install:

-

the 3 screws

-

the connector

-

the drain hose

-

the air conditioning (A/C) pipes and the junction block against the expansion valve. Use 1 nut. Tighten. See Tightening torque See: Body and
Frame/Specifications.

Vacuum pump the air conditioning (A/C) system. See Vacuum pumping See: Service and Repair/Vacuum Pumping.
Fill the air conditioning (A/C) system with refrigerant. See Refrigerant, filling See: Service and Repair/Refrigerant, Filling.
Leak trace the air conditioning (A/C) system. See Leak tracing, fluorescent tracing agent / UV lamp See: Testing and Inspection/Component Tests and
General Diagnostics/Leak Tracing, Fluorescent Tracing Agent/UV Lamp or Leak tracing, electronic leak tracer See: Testing and Inspection/Component
Tests and General Diagnostics/Leak Tracing, Electronic Leak Tracer.
Install the left-hand side panel in the cargo compartment. See Side panel cargo compartment, replacement See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair/Side Panel Cargo Compartment, Replacement.

Climate Control Unit Rear, Replacing|Page 11716 > < Climate Control Unit Rear, Replacing