XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
the filter insert from the housing
the O-ring that seals between the housing and the oil trough.
Allow the filter insert to drain and then discard it in an approved place.
Installing the oil filter
Caution! Clean the housing.
a new filter insert
a new O-ring. Lubricate the O-ring
the oil filter housing. Tighten to Tightening torque See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical Specifications/Tightening
Install the lower cover.
Filling with engine oil
Lower the vehicle and fill with oil. See
Start the engine and check for oil leakage.
Stop the engine and give the oil time to run down into the oil pan.
Then check the oil level. Top up if necessary but do not overfill. Wipe the engine compartment clean. Ensure that the steering wheel and the gear
selector lever are clean.