XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Note! For tightening torques, see Specifications See: Engine, Cooling and Exhaust/Engine/Specifications/Mechanical Specifications/Tightening
the rear heated oxygen sensor (HO2S). Tighten to 45 Nm. Use tool 999 5543 SOCKET NV-22 HO2S See: Tools and Equipment/999 5543 Socket
the wiring for the heated oxygen sensor (HO2S) in clips and clamps. Connect the wiring
a new gasket and new nuts at the join between the three-way catalytic converter (TWC) and the exhaust system. Tighten to 24 Nm
the rubber mounting for the three-way catalytic converter (TWC)
the front SIPS member. Press the brake pipe into place in the member
the lower engine cover.
Erase Diagnostic Trouble Codes (DTCs).