Workshop Manuals Factory service & repair Volvo
01 Relays and Modules02 Sensors and Switches03 Maintenance04 Engine, Cooling and Exhaust05 Powertrain Management06 Transmission and Drivetrain07 Brakes and Traction Control08 Starting and Charging09 Power and Ground Distribution10 Steering and Suspension11 Heating and Air Conditioning12 Restraint Systems13 Accessories and Optional Equipment14 Body and Frame15 Cruise Control16 Instrument Panel, Gauges and Warning Indicators17 Lighting and Horns18 Windows and Glass19 Wiper and Washer Systems
Volvo XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)05 · Powertrain Management
05 · Diagnostics

Central Electrical Unit Engine Compartment (Body Control Module) (page 16 of 41)

Make
Volvo
Model
XC90
Engine
L5-2.5L Turbo VIN 59 B5254T2
Year
2004
Section
Relays and Modules - Computers and Control Systems › Body Control Module › Service and Repair
Powertrain ManagementCentral Electrical Unit Engine Compartment · page 16 of 41
background image

The illustration shows the driver door module (DDM).

-

Remove the control module, see instruction Removing the control module.

-

Disconnect the catches. Lift the upper panel from the control module.

Installing the upper panel

In reverse order.

Driver Door Module (DDM)

Driver door module (DDM), replacing

Preparations

Caution! New software can only be ordered when the control module is installed in the car. VIDA reads off the new control module identity
which is required to order the correct software.

Always check that the control module and control module box connectors do not have bent or damaged terminals or sockets. This may have been the
cause of the fault.

Removing the driver door module (DDM)

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

Parts & tools for this job For 2004 Volvo XC90 2.5L

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.