XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
the lever for the gear shift linkage rod. Tighten the nut. See
the gear selector cable to the transmission. Use 2 M8 screws. Tighten. Press the ball joint for the cable into place on the lever
the connector for the gear-shift position sensor on the mounting. Connect the connector.
Assemble the cable harness with tie straps.
Press the mounting for the cable harness into place in the cover for the control system. Install the mounting for the connectors on the bracket.
Installing the air cleaner (ACL) housing
Install the air cleaner (ACL) housing with connections.
Checking diagnostic trouble codes (DTCs)
Check and erase any diagnostic trouble codes (DTCs).
Check the gear-shift position sensor positions: Use the on-board diagnostic (OBD) system.