volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Location of Components, Solenoids|Page 5893 > < Location of Components, Solenoids|Page 5891
Page 3
background image

Connect the connectors to the solenoids.
Reinstall. See Temperature sensor fluid, transaxle, (TFT) See: Sensors and Switches - Transmission and Drivetrain/Sensors and Switches -
A/T/Transmission Temperature Sensor/Switch/Service and Repair.

Replacing the control system

Preparations

Remove. See Temperature sensor fluid, transaxle, (TFT) See: Sensors and Switches - Transmission and Drivetrain/Sensors and Switches -
A/T/Transmission Temperature Sensor/Switch/Service and Repair.

Remove:

-

the connectors for the solenoid valves

-

the screw for the oil temperature sensor holder. Remove the sensor from the control system

-

the cable harness from the holders on the control system.

Push the cable harness to one side.

Removing the control system

Remove the screws from the control system. Remove the cover from the transmission.

Note! Ensure that there are no cracks on the top of the lever for the gear selector slider.

Location of Components, Solenoids|Page 5893 > < Location of Components, Solenoids|Page 5891