volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Air Bag Control Module > < Procedures|Page 11937
Page 6
background image

Finishing

Securing the cable for the SRS system

Secure the new cable for the SRS system next to the old cable using a tie strap or similar. Reinstall the connectors.

Installing the battery cable

Install the battery negative lead. See Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting 

Checking and adjusting the SRS system

Turn the ignition to position 2.
Check the SRS system to ensure that the warning lamp comes on and stays on while the SRS system performs a self-test. The lamp must go out after a
few seconds. If not, perform fault-tracing according to VIDA vehicle communication.
If everything is working, reinstall other components.
Test drive the vehicle.

Air Bag Control Module > < Procedures|Page 11937