XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Lift the seat into the car.
Install:
-
the connector under the seat
-
the center seat. See Upholstery backrest cushion center (second row), replacing See: Body and Frame/Seats/Seat Cover/Service and Repair/Rear
Seat, Passenger Seat, Seat/Upholstery Backrest Cushion Center (Second Row), Replacing.
Check the function of the seat belt. See Seat belt function, check See: Testing and Inspection.
Carry out a final inspection. See Supplementary restraint system (SRS), inspection See: Testing and Inspection/Supplementary Restraint System (SRS),
Inspection.
Seat belt rear (third row), replacing
Preparations
Fold the backrest cushions up from the floor. Leave the seat cushions in place.
Remove the battery lead. See Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.
For information about handling seat belt tensioners, see Handling non-deployed SRS-components See: Service and Repair/Discarding Pyrotechnic
Components.
Removing seat belts (third row)
Hint: Bend the tip of a groove-cut chisel 90°. Release the catch for the end mounting using the chisel.