XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Note! Check that the arrow on the cover is between the markings on the tank. If the arrow is outside the markings the fuel gauge sensor will
give an incorrect value and the float may catch against the inner wall of the tank. If not: Slacken off the screw and adjust the position of the
sensor. Tighten as above.
Install the level sensor left-hand fuel tank, see: Level sensor fuel tank left, replacing See: Level Sensor Fuel Tank Left, Replacing.
Install on both sides:
the wiring in the sockets on the rubber seal
the cover over the level sensors, tighten the nuts to 6 Nm.
Connect the wiring and the connectors.
Fold the carpet down.
the center rear seat. See Upholstery backrest cushion center (second row), replacing See: Body and Frame/Seats/Seat Cover/Service and
Repair/Rear Seat, Passenger Seat, Seat/Upholstery Backrest Cushion Center (Second Row), Replacing.
the outer rear seat. See Upholstery backrest cushion outer (second row) See: Body and Frame/Seats/Seat Cover/Service and Repair/Rear Seat,
Passenger Seat, Seat/Upholstery Backrest Cushion Outer (Second Row).