XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
6
Move the MacPherson strut back slightly to expose the ball joint. Hold the MacPherson strut in place with tensioner band 999 5682, or equivalent.
7
Removing the ball joint from the wheel spindle
Install:
-
nut 999 7149 (coarse thread pitch) for early edition, or nut 999 7230 (fine thread pitch) for late edition, on the ball joint.
-
sledge hammer 999 2709 on the nut.
Tap the ball joint loose.
8
Cleaning the ball joint mounting surfaces Warning! Always use protective goggles.
Use a rotating steel brush to clean the ball joint seat and the contact surfaces. Lubricate the seat with wheel bearing grease, part no. 1161689.
Installation