XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
12
Refit the ball joint's protective cup (1).
Tighten the ball joint with the 2 new bolts.
Tighten to 50 Nm (37 lb. ft.).
13
Installing the ball joint in the control arm
Note!
Position the hook of the lever 999 7076 on the control arm so that it does not come into contact with the ball joint's boot when it is fitted to the
control arm.
Remove the tensioner band from the MacPherson strut.
Press down the control arm using the lever 999 7076.
Remove the protective cup from the ball joint and fit the ball joint pin in the control arm.
14
Fitting the nut to the ball joint
Note!
The ball joint pin must not rotate. Use torx wrench TX40 as a holding tool so that the rubber boot is not damaged.
Use socket 999 5467 as an adapter for the torque wrench or a ring wrench adapter designed for the torque wrench.
Fit the 1 nut and tighten to 100 Nm (74 lb. ft.).
