XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Control Arm Bushing: Technical Service Bulletins
Suspension - Front Control Bushing Replacement
NO: 61-07
DATE: 6-28-2005
MODEL: XC90
M. YEAR: 2003
SUBJECT: Front Control Arm Bushing Replacement.
REFERENCE: VIDA
DESCRIPTION:
This Service Bulletin describes replacement of bushings in the front control arm.
Service: Replacing control arm bushing
1.
Note! As the illustrations in this service
information are used for different model years and
/ or models, some variation may occur. However,
the essential information in the illustrations is
always correct.
Preparatory work
Control arm removal
2.
For control arm removal, see: VIDA
Removal, replacement and installation
Wheel suspension, steering
Front wheel suspension
Front axle member, control arm
Front control arm, replacing
Note! The following method shows the positions of
the bushings in relation to the control arm.
In this method, work is carried out on the left control arm.
Positioning on the right side is reversed.
Note!
It is extremely important to the properties and service life of the bushings that they be placed in the correct position.
Removal:
Remove the front bushing
3.
Place the control arm in a workshop press. Use drift 999
7211 and socket 999 7210; see illustration.
Press out the bushing.
Installation:
Install the front bushing
4.