XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Lateral Stabilizer Rod: Service and Repair
Bushings Link Arm, Replacing
Bushings link arm, replacing
Special tools:
999 7209 Socket See: Tools and Equipment/999 7209 Socket
999 7210 Socket See: Tools and Equipment/999 7210 Socket
999 7211 Drift See: Tools and Equipment/999 7211 Drift
999 7051 Drift See: Tools and Equipment/999 7051 Drift
Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Removing link arm
Remove the link arm according to: Control arm front, replacing See: Control Arm/Service and Repair/Control Arm Front, Replacing.
Note! The following method shows the position of the bushings in relation to the link arm.
This method shows work done on left link arm. The placement on the right side is mirror-imaged.
Note! It is very important for the bushings characteristics and service life that they are positioned correctly.
Removal
Removing the front bushing
Place the link arm in a workshop press. Use 999 7211 Drift See: Tools and Equipment/999 7211 Drift and 999 7210 Socket See: Tools and
Equipment/999 7210 Socket.
Press out the bushing.
Installation
Installing the front bushing