XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Rear Knuckle Alignment Link: Service and Repair
Bushing Outer Tie Rod, Replacing
Bushing outer tie rod, replacing
Special tools:
999 7054 Adapter incl. 2x MC6C M6X12 See: Tools and Equipment/999 7054 Adapter incl. 2x MC6C M6X12
999 7035 Sleeve See: Tools and Equipment/999 7035 Sleeve
999 7044 Sleeve See: Tools and Equipment/999 7044 Sleeve
999 7034 Connecting rod M12X400 See: Tools and Equipment/999 7034 Connecting Rod M12X400
999 7036 Drift See: Tools and Equipment/999 7036 Drift
999 7132 Nut M12 See: Tools and Equipment/999 7132 Nut M12
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removal
Remove the tie rod
Remove the inner mounting of the tie rod. See Tie rod, replacing See: Tie Rod, Replacing and fold the tie rod down.
Removing the bushing
Note! Note the position of the bushing before removal.
Install the hydraulic cylinder as illustrated.
Use999 7054 Adapter incl. 2x MC6C M6X12 See: Tools and Equipment/999 7054 Adapter incl. 2x MC6C M6X12 with socket 999 7035 Sleeve See:
