XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Installing the lifting beams and lifting hooks on the engine lifting lugs.
NOTE: The front lifting beam must be equipped with the fixture kit 999 7070 as illustrated.
Position lifting beam 999 5716 on the wheel arch and directly above the engine lifting lug on the left and right-hand sides.
Connect lifting hooks 999 5460 on the lifting lugs on the right-hand side of the engine with a clearance of 10 mm.
Applies only to the T6:
Also use lifting lug 999 5185 on the left-hand side of the engine.
Tighten to light contact on the left hand side.
Remove:
-
the front wheels
-
the splash guard under the engine.
Removing the skid plate
Remove the 6 screws.
