XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
release from the sub-frame.
Remove the bracket for the heated oxygen sensor (HO2S) from the sub-frame (does not apply to diesel cars).
Remove the heated oxygen sensor (HO2S) wiring from the right hand side of the sub-frame (applies only to 6-cylinder engines only, not diesels).
Lower the sub-frame a further 40 mm.
Pressing out the bushings
Install the hydraulic tool and press sleeve as illustrated.
Press the bushings out of the sub-frame, see the following illustration.
NOTE: Use any of tools 999 5575, 999 5576 and 951 2564.
Marking for the bushing on the sub-frame
Clean the hole for the bushing in the sub-frame.
Press out the bushing by hand.