XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Transfer:
-
the control arms. Use new screws and new nut. Tighten the front screws. Tighten to 65 Nm. Angle-tighten 90°. Use bevel protractor 951 2050
BEVEL PROTRACTOR See: Tools and Equipment/951 2050 Bevel Protractor. Tighten the rear screw. Tighten to 105 Nm. Angle-tighten 90°
-
the anti-roll bar. Tighten to 60 Nm
-
the right-hand engine mounting. Tighten the screws. Tighten to 65 Nm. Angle-tighten 60°
-
the exhaust mounting bracket. Tighten to 50 Nm
-
the shock absorber Tighten to 50 Nm
-
lower torque rod. Tighten to 65 Nm. Angle-tighten 90°.
Install new pipe / hose holders.
Installing the sub-frame