volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Rear Subframe|Service and Repair|Page 11147 > < Rear Subframe|Service and Repair|Page 11145
Page 5
background image

Remove:

-

the return spring at the expander

-

the expander.

Lift the brake shoe slightly. Grip the expander and pull it outwards to access the cable.
Unhook or pry apart the expander (1) by the mechanical cable to remove it.

Remove the guide sleeve for the cable sleeve. Apply a screwdriver between the guide sleeve lug and wheel arch. Pry apart slightly to remove the sleeve.

Lowering the sub-frame

Position a lifting table under the sub-frame.
Install the lifting table so that the load is taken off the sub-frame screws. Remove the bracket for the fuel pre-filter and brake pipes. Remove the
sub-frame screws with the accompanying washers and brackets. Carefully lower the sub-frame approximately 100 mm.

Remove:

-

the pressure pump

-

the hose for the carbon filter container

-

the plastic clips.

Lower the sub-frame.

Rear Subframe|Service and Repair|Page 11147 > < Rear Subframe|Service and Repair|Page 11145