XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Remove the 2 screws for the inner front control arm mounting.
Slacken off the screw three turns for the inner rear control arm mounting. Use puller 998 5434 SEPARATOR L 200 MM See: Tools and Equipment/998
5434 Separator L 200 mm with counterhold 999 7074 Adapter plate See: Tools and Equipment/999 7074 Adapter Plate.
Note! Only press until the bushing releases from the splined area.
Remove the screw.
Remove:
-
the upper control arm
-
the 4 screws for the anti-roll bar
-
the anti-roll bar.
Installation
Tightening torque
For tightening torques, see Specifications See: Steering/Specifications/Mechanical Specifications.
Installing the sub-frame
Install:
-
the anti-roll bar
-
the 4 M10 screws for the anti-roll bar in the sub-frame.
Installing the shock absorber
Raise the new shock absorber to the upper mounting.
Install the new nut. Tighten. See Tightening torque See: Steering/Specifications/Mechanical Specifications.
Note! Ensure that the bushing seats correctly in the opening in the rear suspension.
Install:
-
the sub-frame
-
the M12 screws for the sub-frame cover