XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Suspension Strut / Shock Absorber: Removal and Replacement
Bearing Shock Absorber Front, Replacing
Bearing shock absorber front, replacing
Special tools:
999 5467 Socket See: Tools and Equipment/999 5467 Socket
951 2050 Bevel Protractor See: Tools and Equipment/951 2050 Bevel Protractor
Note! As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information in the illustrations is always correct.
Preparations
Remove:
-
the wheel
-
the anti-roll bar link from the spring strut.
Note! Use a Torx wrench as a counterhold so that the boot is not damaged.
Remove:
-
the ABS line from the spring strut
-
the ABS sensor. Hang up the sensor using a piece of wire.
Measure the spring strut position in relation to the wheel spindle before removal
