XC90 L5-2.5L Turbo VIN 59 B5254T2 (2004)
Tighten to 105 Nm. Angle-tighten 90°. Use bevel protractor951 2050 BEVEL PROTRACTOR See: Tools and Equipment/951 2050 Bevel Protractor.
Install:
-
the anti-roll bar link to the spring strut. Use a new nut. Tighten to 50 Nm. Counterhold using a Torx wrench to prevent damage to the boot
-
the ABS sensor. Tighten to 10 Nm.
Note! Ensure that the ABS sensor seat in the wheel spindle is absolutely clean. Clean the ABS sensor with a soft brush.
Install:
-
the ABS sensor cable in the bracket
-
the wheel. See Installing wheels See: Wheels and Tires/Wheels/Service and Repair.
Shock Absorber Front, Replacement
Shock absorber front, replacement
Special tools:
999 5467 SOCKET See: Tools and Equipment/999 5467 Socket
999 5469 SOCKET See: Tools and Equipment/999 5469 Socket
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Removing the spring strut