volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Replacing the Pinion Seal for the Bevel Gear|Page 6336 > < Replacing the Pinion Seal for the Bevel Gear|Page 6334
Page 2
background image

Lubricate the torque converter throat with ATF oil.

Note! Take care not to damage the oil pump during installation.

Make sure torque converter is as far into the transmission as possible. Check with a ruler. The distance between the cover and retaining tabs must be 
approximately 14 mm.

Installing the transmission

Install the transmission according to See: Service and Repair/Removal and Replacement

Replacing the Pinion Seal for the Bevel Gear|Page 6336 > < Replacing the Pinion Seal for the Bevel Gear|Page 6334